So, you think you can skateboard, but can you scrapeboard, you slime bag? Scrapeboard is a DDR inspired alt control game that uses a real skateboard deck instead of your feet. Do you have the moves to skate through a gauntlet of goons all the way to Tony Hawk?
The standard controller is a custom platform combined with a modified skatedeck, seen in the above GIF. It can be built using the instructions in the [builder's manual][1]. Custom interfaces can also be created using an Arduino or Raspberry Pi. There is also keyboard support built-in. It is meant for testing, but the game can be played with it.
The hardware requirement for [serial mode](#Serial) is an [Arduino][] or Arduino-equivalent device that can run the [serial program][]. [Raspberry Pi][] mode is similar to serial mode, but it uses the Python GPIO library to get input directly from the Raspberry Pi pins. For [keyboard mode](#Keys), no special hardware is required, although a gamepad or [Makey Makey][] could be used to create a custom controller that sends key presses.
The software requires Python, [Pygame][], and a custom Python game framework [PGFW][]. The Python version should be 3.9 or higher. The Pygame version should be 1.9.6 or higher. PGFW is a submodule of this repository, so it can be cloned simultaneously using the `--recursive` flag. Python and Pygame can be installed on any operating system, including Windows, OS X, and Linux.
Installing Python will usually install Python's package manager PIP as well. PIP can be used to install Pygame by running the following from your terminal (for example, PowerShell on Windows).
To run the game using the custom skateboard and metal pads, the Arduino attached to the pads must be plugged into USB, and the [pyserial][] package must be installed on the computer.
The Arduino must be loaded with the [serial program][] and connected to USB. The game will try to detect the Arduino, but if that does not work, the device location of the Arduino can be specified in the [config file][].
Raspberry Pi GPIO input is also supported. Refer to [Scrapeboard Builder's Manual][2] for how to build the circuit. Once the circuit is in place, the game will be able to detect GPIO input. Run with the `--pi` flag to activate Raspberry Pi mode.
The full list of configurable values is in the [config file][]. There are also command line flags that can override config values. Use the help flag to see the possible values:
Original Scrapeboard code is released without restriction on copying, modifying, or selling, under the zlib license. Art, sound, text, and schematic assets are released under CC BY 4.0. This means users are free to use Scrapeboard for any use, including modifying it and even selling the modification, and the modifications would not need to be released as open source. Use of the assets requires attribution is given to Scrapeboard for the original assets, and if the source is distributed, the zlib license must be included as the license for the original code.
PGFW is included under its zlib license. Python, Pygame, Arduino and Raspberry Pi all have their own licenses, but they are not distributed with this project.