From 58637344f0bb1fc5f1e155a1bc16b8867cc50924 Mon Sep 17 00:00:00 2001 From: frank Date: Tue, 25 Apr 2023 19:04:28 -0400 Subject: [PATCH] fix anchor links --- README.md | 2 +- doc/Scrapeboard_builder's_manual.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 4e53bd7..23a58b1 100644 --- a/README.md +++ b/README.md @@ -17,7 +17,7 @@ Controller The standard controller is a custom platform combined with a modified skatedeck, seen in the above GIF. It can be built using the instructions in the [builder's manual][1]. Custom interfaces can also be created using an Arduino or Raspberry Pi. There is also keyboard support built-in. It is meant for testing, but the game can be played with it. -The hardware requirement for [serial mode](#Serial) is an [Arduino][] or Arduino-equivalent device that can run the [serial program][]. [Raspberry Pi][] mode is similar to serial mode, but it uses the Python GPIO library to get input directly from the Raspberry Pi pins. For [keyboard mode](#Keys), no special hardware is required, although a gamepad or [Makey Makey][] could be used to create a custom controller that sends key presses. +The hardware requirement for [serial mode](#serial) is an [Arduino][] or Arduino-equivalent device that can run the [serial program][]. [Raspberry Pi][] mode is similar to serial mode, but it uses the Python GPIO library to get input directly from the Raspberry Pi pins. For [keyboard mode](#keys), no special hardware is required, although a gamepad or [Makey Makey][] could be used to create a custom controller that sends key presses. See [Scrapeboard Builder's Manual][1] for detailed instructions on how to build a complete system from scratch using an Arduino or Raspberry Pi! diff --git a/doc/Scrapeboard_builder's_manual.md b/doc/Scrapeboard_builder's_manual.md index c5c66ea..a3fef90 100644 --- a/doc/Scrapeboard_builder's_manual.md +++ b/doc/Scrapeboard_builder's_manual.md @@ -101,7 +101,7 @@ Supplies ### Optional -If access to a router is available, a more compact version of the platform with a smooth, flush surface can be created. It will require creating insets for the metal panels, inner screws, brackets, and wires using the router. To create this version, make the following supply substitutions, and follow the steps marked optional in [Building a Scrapeboard and platform](Scrapeboard_builder's_manual.md#Building-a-Scrapeboard-and-platform). +If access to a router is available, a more compact version of the platform with a smooth, flush surface can be created. It will require creating insets for the metal panels, inner screws, brackets, and wires using the router. To create this version, make the following supply substitutions, and follow the steps marked optional in [Building a Scrapeboard and platform](#building-a-scrapeboard-and-platform). * Replace plywood with smaller, square pieces: 4 × [plywood](https://www.homedepot.com/p/203504324) pre-cut to 14x14x3/4" each (oak or birch hardwood recommended) * Replace metal sheets with [4 × 18-gauge, 12x12" metal sheets](https://www.amazon.com/dp/B09RZMTZBG)