shampoo/playzing
shampoo
/
playzing
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

fix link to final photo

This commit is contained in:
ohsqueezy 2023-02-20 21:49:17 -05:00
parent 36cc14ecae
commit 9bb52e6f09
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
doc/Playzing_builder's_manual.md
View File

@ -169,7 +169,7 @@ Screw the `3/4"` machine screws in through the top and tighten the nut by hand o
Gamepad shell
-------------
A piece of wood is used to create a shell for the gamepad. The suggested size `3 x 2-1/4 x 3/4"` is a good portable size that fits well in people's hands. However, any size is fine. It is recommended, but optional, to use a router to carve out an inset for the circuit board and attached wires in the middle of the bottom of the wood.
A piece of wood is used to create a shell for the gamepad. The suggested size `3 x 2-1/4 x 3/4"` is a good portable size that fits well in the player's hands. However, any size is fine. It is recommended, but optional, to use a router to carve out an inset for the circuit board and attached wires in the middle of the bottom of the wood.
If using a router, trace along the gamepad circuit board where the wood will be carved. In this photo, there are extra marks where the entire wood block needed to be cut. Set the router depth to `1/8"` and carve out the parts inside the outline.
@ -182,7 +182,7 @@ Mount the circuit board to the wood by drilling `1/2"` screws through the board'
Gasket tape
-----------
Because the surface of the oven can get very hot, it is important to keep the plastic wire sheathing of the gamepad and Raspberry Pi power supply wires from touching it. The gamepad and power wires can be run down the back of the oven along gasket tape to prevent them from touching the oven surface, and screws can be drilled for guiding the wire along the back of the wood blocks.
Because the surface of the oven can get very hot, it is important to keep the plastic wire sheathing of the gamepad and Raspberry Pi power supply wires from touching the metal. The gamepad and power wires can be run down the back of the oven along gasket tape to prevent them from touching the oven surface, and screws can be drilled for guiding the wire along the back of the wood blocks.
Find a good position for the power and gamepad wires, and drill two `1/2"` screws into the back of the wood blocks to hold them in position.
@ -198,7 +198,7 @@ On the underside of the toaster, tape the gamepad wire to a long strip using thr
Let the games begin!
![Playzing completed build](img/manual/Playzing_completed_build.jpg)
![Playzing completed build](img/manual/Playzing_completed_build.png)
[Raspberry Pi Imager]: https://www.raspberrypi.com/software/
[Eviciv 5" LCD screen]: https://www.amazon.com/dp/B08SLXWFYR/